AMPRO Industrial Partner

LB3-486-Q - Ampro LB3-486-Q EBX CPU Board | LittleBoard 486 Single-board Computer...

Request Quote
For Price
Part Number:
LB3-486-Q
Model Number:
LB3-486-Q
Make:
AMPRO
Lead Time:
Available
Qty In Stock:
Available

Ampro LB3-486-Q EBX CPU Board | LittleBoard 486 Single-board Computer (SBC) Simple Type: CPU Boards

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 4x SERIAL PORT
  • AMD 486DX4/DX5 Processor
  • AUI CONNECTOR
  • BYTEWIDE SOCKETS
  • C&T 65545 VIDEO CONTROLLER
  • CRT CONNECTOR
  • ETHERNET CONTROLLER
  • FLAT PANEL CONNECTOR
  • FLOPPY INTERFACE
  • IDE CONNECTOR
  • PARALLEL CONNECTOR
  • PC VIDEO INPUT
  • PC/104 CONNECTOR
  • POWER CONNECTOR
  • RJ45 ETHERNET CONNECTOR
  • SCSI CONTROLLER
  • SCSI INTERFACE
  • SERIAL PORT 1 & 2
  • UP TO 128 MBYTES DRAM
  • UTILITY CONNECTOR

Specifications

    General
  • BIOS: Award ROM-BIOS with Ampro enhancements (See Ampro Embedded-PC Enhancements section)
  • Bytewide Socket: Two 32-pin byte-wide memory sockets-usable with 32K-1M byte EPROMs, 32K-512K byte Flash EPROMs; 32K-512K byte SRAMs, or 32K-512K byte NOVRAMs; Onboard battery converts SRAM into NOVRAM; Usable with DiskOnChip2000™ read/write flash SSD device (only one socket usable with DiskOnChip)
  • CONFIG EEPROM: 512 bits available for OEM use
  • Counter Timer: 3 programmable counter/timers (8254 equivalent)
  • CPU: AMD 486DX4/DX5, 66 or 100/133 MHz
  • Data Rate: 10Base2 (thin coax), via external MAU connected to AUI interface; 10M bits/sec
  • Dimensions: 5.75 x 8.0 x 1.2 in. (146 x 203 x 30 mm)
  • Display Controller: Supports CRT, LCD, and EL displays; C&T 65545
  • DMA Internal: 15 interrupt channels (8259 equivalent); 7 DMA channels (8237 equivalent)
  • Extended Operating Temperature: –40° to +85° C (available by special order); Note-additional airflow or heatsinking required to maintain 85° C maximum CPU case temperature.
  • Fast IDE: Supports 1 or 2 drives; Supports “fast” IDE data transfer modes, up to PIO mode 4
  • Flat Panel: Supports 24-bit “true color” (640 x 480); “GUI accelerator” for enhanced graphic function performance; Software programmable flat panel interface signal timing; Sequenced LCD power to protect display; Supports DPMS-compatible displays; Optional plug-in LCD bias supply - supplies ±15 to ±35 VDC @ 30 mA; voltage level adjusted via onboard or external potentiometer
  • Floppy Disk Drive: Supports 1 or 2 drives
  • Keyboard: Standard PC/AT keyboard port; Speaker port with 0.1 watt output
  • LAN Controller: Complies with IEEE-802.3 (ANSI 8802-3); SMC 9000 series
  • Media Interface Options: 10Base-T (twisted pair), via onboard RJ45 connector; AUI, via onboard header connector; DB15F transition cable available
  • Memory: Supports up to 64 Mbytes, Fast Page or EDO DRAM; Supports two 72-pin SIMMs (1 bank) with or without parity; Shadow RAM support provides fast system/video BIOS execution
  • On-board Display RAM: 512 K or 1 MByte (soldered)
  • Operating Temperature: 0° to 70° C
  • Parallel Port: EPP/ECP compatible, bidirectional
  • Power Fail: Triggers when +5V power drops below +4.7V
  • Power Requirements: (Please refer to the Ampro Ordering Guide.)
  • Real Time Clock: Battery backed real-time clock and CMOS setup
  • Relative Humidity: 5% to 95%, non-condensing
  • Remote Boot ROM: Can be installed in byte-wide SSD socket
  • SCSI II: Adaptec AIC-6360; Supports SCSI I/II, synchronous or asynchronous transfers
  • Serial POrt: Four FIFO-buffered serial ports with full handshaking (16550 equivalent); Each channel supports either RS232C (direct connection) or RS485 (via the Ampro RS485 Adapter)
  • Storage temperature: –55° C to +85° C
  • Watchdog Timer: Utilizes real time clock alarm function; Timeout triggers NMI or hardware reset
  • Weight: 9.5 oz. (270 gm)

 

Applications

  • None Available

Aliases

  • None Available