MB1-800 - Ampro MB1-800 CPU Board - Radisys Endura 845GV ATX Pentium...
Request Quote
For Price
- Part Number:
- MB1-800
- Model Number:
- MB1-800
- Make:
- AMPRO
- Lead Time:
- Available
- Qty In Stock:
- Available
Ampro MB1-800 CPU Board - Radisys Endura 845GV ATX Pentium 4 Motherboard Simple Type: CPU Board
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- ADD: AGP Digital Display card support with dual DVO channels for TMDS (PanelLink), LVDS and TV-out interfaces
- AGP: AGP cards not supported
- Audio: AC97 Analog Devices AD1885 CODEC for AC97 v2.1 Digital audio integrated in chipset
- Battery: Lithium coin cell (5 years operating life typical)
- BIOS: Type:Based on Phoenix ServerBIOS 3.0; Special Features:Customizable defaults, customer logo, silent boot, QuickBoot, automatic configuration, Universal Console Redirection
- Capacity: Maximum 2GB
- Chipset: Intel 845GV with ICH4 (long life, embedded chipset)
- Compact Flash: Compact Flash socket on secondary IDE as Master or Slave (jumper selectable)
- Dimensions: 12" x 9.6", 4-layer PCB, ATX compliant
- Drive Types: Supports ATAPI, LS120 and ZIP drives
- ECC / Parity: Not supported
- EMC Compliance: Evaluated in accordance with EN55022, EN55024 and FCC Part 15 Class B
- Expansion Slots: PCI:6 dedicated bus master 32-bit / 33MHz PCI 2.2 slots
- Floppy Types: Supports standard 3.5" and 3-mode floppy drives
- Front Panel: Connectors for power control and status, Reset, LAN LEDs, IDE activity LED
- FSB: 400MHz and 533MHz
- GPIO: 13 GPIO lines via header (also supports an LCD character display)
- IDE Devices: Two Ultra ATA/100 interfaces via 40-way boxed header
- Keyboard & Mouse: Swappable PS/2 connectors, on-board header connectors
- Memory Sockets: Two 184-pin DIMM sockets for DDR266 SDRAM (PC2100)
- Network Controllers: Intel 82551ER controller for 10/100 Ethernet; IEEE 802.3 10Base-T, 100Base-TX compatible
- On-board Connectors: CD In, AUX In, Line Out ATAPI connectors onboard
- On-board Connectors: On-board header to connect to external LEDs
- Operating Systems: Windows 2000, NTe, XP, XPe, Linux, others by request
- Parallel Port: 25-pin D-type supporting bi-directional, EPP and ECP modes
- Power Consumption: 91W with a 2.8GHz Pentium 4 with 1GB SDRAM, measured running Windows 2000 power stress software
- Power Management: PCI PME, ACPI 1.0b
- Power Supply: Support for hard- and soft-switched power supplies
- Processor Socket: 478-pin µPGA ZIF socket for Pentium 4 and Celeron processors
- Rear Connector: RJ45 rear panel connector with two LEDs to indicate line activity, link integrity and line speed
- Rear Connectors: Mic, Line Out and Line In jacks on rear panel
- Relative Humidity: 5% to 95% non-condensing
- Remote / Wake-up: Not supported
- Safety Compliance: Evaluated in accordance with UL60950, EN60950 and IEC60950
- Serial Ports: COM1 on 9-pin D-type, COM2, via 10-way header
- System Management: Monitoring:Voltage, temperature and fans, Automatic CPU fan speed control (O/S independent), Anti-tamper security; Watchdog:Watchdog timer; SMBus connector
- Temperature: Operating:0°C to 55°C; Storage:-40°C to 85°C
- USB: 4 rear panel USB 2.0 ports (also supports 1.1), 2 USB 2.0 ports on internal headers
- VGA: Integrated Intel Extreme graphics
- VGA: Via 15-way D-type
- Video Resolution: 1600 x 1200 pixels with 32-bit color support
Applications
- None Available
Aliases
- None Available